HOT SALE Trimming specular clear polishing effect Monocrystal Polishing Cutting Tool processing highlight 
- Suitable for workpiece : Carbon Steel, Aluminium alloy, Cuprum, Acrylic
- HRC: 45/55/60/65 HRC ,After quench, for processing large hardness of 150°
- Other Service: OEM/ODM or custom-made
- Effect:Highlights or matte effects
- Machining parts:Outer circle and inner circle of turning parts
overview
Single crystal diamond tool brittleness is large, the blade is very sharp, when the impact is easy to break the edge, so as far as possible in the balance, no vibration of the working conditions, but also should be used to improve the rigidity of the workpiece and tool and the rigidity of the whole system, increase its seismic capacity, cutting consumption is more than 0.05mm is appropriate.
The higher cutting speed can reduce the cutting force, while the lower cutting speed can increase the cutting force, thus accelerating the tool breakage failure. Therefore, the cutting speed should not be too low when the single crystal diamond tool is used.
It is necessary to avoid the contact between the single crystal diamond cutter and the workpiece or other hard objects in the static state, so as to avoid damaging the cutting edge and stopping the tool without leaving the workpiece
Diamond knife blade is easy to damage, when the blade is not working with rubber or plastic cap to protect the blade and placed in a separate knife box for safekeeping, before each use with alcohol blade asked her to wipe clean before work
Maintaining environment, machine performance stability, and operator proficiency have an impact on tool life.
MCD and diamond is of high hardness, high wear resistance and high heat transfer coefficient, and with natural diamond belongs to a single crystals, its not the nature of the grain boundary can create a very sharp blade quality, is out of reach for other materials, has long been used in the production of ultra precision machining of diamond cutters, polishing tools and abrasion resistant components.
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Our advantage:
- 1. 10 years experience in carbide roll and cutting tool manufacturing
- 2. From row material to tool produdtion.
- 3. World top level prodution equipment and rich experience team
ATTACTION:
- 1.Make sure work piece and machine are stable and use a precision holder.
- 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
- 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.
Product Tags:
|
|
High Accurate Diamond Milling Tools Diamond Tip Cutting Tools Sharp Blade Images
|
